Table of Contents
Advertisement
Press ENTER.
"C1" will begin to flash. If you desire to program chan-
nel 1, press ENTER. If channel 2 is desired, press
ADVANCE and the display will flash "C2". Press
ENTER.
The bar under Sunday is now flashing. Select the days
you want operation by pressing ENTER when the bar
appears under the day. Press ADVANCE to pass the
days that you do not want operation.
After selecting the days of the week, the bar under H1
will begin to flash. If your present setting is to occur on
all single-day holidays, press ENTER to select H1. If
not, press ADVANCE to pass it.
The bar under H2 is now flashing. If the present setting
is to occur on all block holidays, press ENTER to
select H2. If it is not to occur on any block holiday,
press ADVANCE to pass this selection.
NOTE 1: Holiday schedules can be programmed sep-
arately if desired. Simply select H1 or H2 as
the day selection when setting your sched-
ules. (See Section 7.1)
NOTE 2: If no holiday dates are programmed, you can
ignore H1 and H2.
NOTE 3: If a single or block holiday is programmed
and no schedule is entered for it, then NO
OPERATION will occur during the holiday.
The last operation before the holiday (whether
ON or OFF) will remain throughout the holiday
period.
The hour dashes are flashing. Press ADVANCE to
program the hour desired. (Note AM/PM.) Press
ENTER.
The minutes are flashing. Press ADVANCE, if needed,
to modify the minutes. Press ENTER.
The bar over the ON is flashing. Press ENTER if this is
the desired operation. If not, press ADVANCE to flash
the OFF. Then press ENTER.
12
Hide quick links:
Advertisement
Table of Contents
