To Change Daylight Savings Dates - Tork DZS200 Installation & Operation Manual

The date digits are flashing. Press ADVANCE to set
the daylight savings start date. Press ENTER. The dis-
play shows
TIME/DAY
7
SIG. TIMER
Notice the bar over the OFF. This indicates the day-
light savings end date.
The dashes for the end month are flashing. Press the
ADVANCE key to set the daylight savings end
month.(Last Sunday in October for U.S.) Press
ENTER.
The date digits are flashing. Press ADVANCE to set
the date. Press ENTER.
The HOLIDAY symbol is flashing. Daylight savings is
now set. Press ADVANCE to proceed to another mode
or RUN/SET to exit to the Run mode.
NOTE: Daylight savings dates need to be readjusted
each year.

3.1 TO CHANGE DAYLIGHT SAVINGS DATES

Press the RUN/SET key to go from the Run mode to
Set modes. Press ADVANCE to go to the Holiday
mode then press ENTER. H1 is flashing. Press
ADVANCE to flash H2 then press ENTER. The display
shows
TIME/DAY
8
SIG. TIMER
with RVU flashing.
SU MO TU WE TH FR SA H1 H2
DATE
SCH/RVU
SCH. SCH. ON ON
SIGNAL SIGNAL A A
SU MO TU WE TH FR SA H1 H2
DATE
SCH/RVU
SCH. SCH. ON ON
SIGNAL SIGNAL A A
OFF
B
RVU
OFF OFF
B B
10
HOLIDAY
LATITUDE
SUNSET
SUNRISE
SET
HOLIDAY
LATITUDE
SUNSET
SUNRISE
SET