Table of Contents
Advertisement
If channel 1 is a signal timer the display shows
TIME/DAY
15
SIG. TIMER
SCH/RVU
The bar over Sunday is flashing. Use the ENTER key
to select the days you want to program and the
ADVANCE key to pass the days you don't want.
After selecting days, the dashes for hour will flash.
Press ADVANCE to set the hour. (Note AM/PM.)
Press ENTER.
The minutes are flashing. Press ADVANCE to set the
minutes. Press ENTER.
TIME/DAY
16
SIG. TIMER
The bar over SIG. A or SIG. B is flashing. Press
ADVANCE to flash the desired signal then press
ENTER.
The display shows dashes and Sunday is again flashing.
Proceed as before to schedule the other signal days
and times. Press RUN/SET to quickly exit to the Run
mode when scheduling is complete.
Example: A certain company's Production department
has a horn on channel #2 programmed as follows:
SIG. A = 3 secs.; SIG. B = 10 secs.
MON thru FRI, 8:00 AM, SIG. B — Start Signal
MON thru FRI, 10:00 AM, SIG. A — Start of Break
SU MO TU WE TH FR SA H1 H2
DATE
SCH.
ON
OFF
SIGNAL
A
SU MO TU WE TH FR SA H1 H2
DATE
SCH/RVU
SCH.
ON
SIGNAL
A
B
OFF
B
16
HOLIDAY
LATITUDE
AM
SUNSET
SUNRISE
SET
HOLIDAY
LATITUDE
AM
SUNSET
SUNRISE
SET
Hide quick links:
Advertisement
Table of Contents
