Special Instructions - Ricoh BE-C1 D046 Field Service Manual

Special Instructions

Moving the Copier
1. Open the upper unit [A]
2. Push the pressure lever [B] to the left. This separates the cleaning the blade from the drum so the blade
does not damage the drum during shipping.
3. After setting up the printer in its new location, repeat this procedure and push the pressure lever to
the right to bring the cleaning blade in contact with the drum.
4. After moving the machine to a new location, always re-install the leveling shoes under the casters of
the machine.
Points to Confirm with Operators
At the end of installation or a service call, instruct the user about use of the machine. Emphasize the following
points.
• Show operators how to remove jammed paper and troubleshoot other minor problems by following
the procedures described in the operating instructions.
• Point out the parts inside the machine that they should never touch or attempt to remove.
5