Ricoh BE-C1 D046 Field Service Manual page 625

ECP (Centro)
Disables and enables the ECP feature (1284 Mode) for data transfer.
52
0: Disabled
1: Enabled
Job Spool Setting
65
Switches job spooling spooling on and off.
0: No spooling 1: Spooling enabled
Job Spool Clear: Start Time
This SP determines whether the job interrupted at power off is resumed at the next power
66
on. This SP operates only when SP5828 065 is set to 1.
1: Resumes printing spooled jog.
0: Clears spooled job.
Job Spool (Protocol)
This SP detemines whether job spooling is enabled or dispabled for each protocol. This is
a 8-bit setting.
0 LPR
69
1 FTP (Not Used)
2 IPP
3 SMB
TELNET Operation SettingsTELNET (0:OFF 1:ON)
Disables or enables Telnet operation. If this SP is disabled, the Telnet port is closed.
90
0: Disable
1: Enable
Web Operation Web (0:OFF 1:ON)
Disables or enables the Web operation.
91
0: Disable
1: Enable
4 BMLinks (Japan Only)
5 DIPRINT
6 Reserved (Not Used)
7 Reserved (Not Used)
System Service Mode
8
177