2. Installation
Before You Begin
Slot Cover Removal
2
The SD card slot cover ¬ and board slot covers Á, ®, and ¯ are located on the faceplate of the controller
box attached to the right rear side of the main machine. The unmarked board slot ° holds the File Format
Converter which is pre-installed at the factory.
• The SD card slots (under the cover) are marked "1" and "2" on the left.
• The board slot covers (2), (3), (4) are marked "A", "B", "C" below each cover.
• The decal attached to the back of the machine tells you where the SD cards are boards should be
installed.
188