Ricoh BE-C1 D046 Field Service Manual page 553

Target Temperature: Hot Roller
These settings set the values for the target temperature of the hot roller, based on the type of
1931
paper used: Plain Paper, Tracing Paper (Trans.), and Film. Each paper type has 5 modes, so
a total of 15 calculations is done:
Type
1
2
3 Plain
4
5
6
7
8 Trans.
9
10
11
12
13 Film
14
15
016 Plain: Low Temperature Mode
Target Temperature: Pressure Roller
These settings set the values for the target temperature of the pressure roller, based on the type
1932
of paper used: Plain Paper, Tracing Paper (Trans.), and Film. Each paper type has 5 modes,
so a total of 15 calculations is done. This SP codes sets the start temperature for feedback
pressure control.
SP1932 Settings Table
Mode [Range/Default/Step °C]
1
2 [120 to 220/195/5°C]
3
4 [120 to 220/185/5°C]
5 [120 to 220/175/5°C]
1 [120 to 220/220/5°C]
2
[120 to 220/195/5°C]
3
4
[120 to 220/165/5°C]
5
1 [120 to 220/195/5°C]
2 [120 to 220/190/5°C]
3
[120 to 220/185/5°C]
4
5 [120 to 220/175/5°C]
[120 to 220/195/5°C]
System Service Mode
8
105