Type
Mode
152
153
1955
Transport Fan Duty Setting DFU
Very Thin Paper
Selects the transport fan rotation speed for Japanese chemical paper.
1
The suction created by the transport motor below the paper feed path keeps the paper straight.
The force of this suction could be too great for extremely thin paper.
[0 to 100/0/10 %]
Stand-by Condition
2
Selects the transport fan rotation speed for stand-by mode.
[0 to 100/100/10%]
SP2000 Drum
2001 Charge Corona Adjustment DFU
1 Total Corona Current
2 Grid Voltage: Image Area
3 Grid Voltage: ID Sensor Pattern
2101 Printing Erase Margin
SP2946 must be "On", or these settings will be ignored.
1 Leading Edge
Step
Input Value
2
[a]+[b]
3
[a]+[b]+[c]
Adjusts the charge corona output.
[650 to 1530/1250/10 uA]
Adjusts the charge grid output.
[160 to 1080/800/10V]
Adjusts the charge grid output for the ID sensor pattern.
[160 to 1080/650/10V]
Adjusts the printing margin.
[0 to 10/2/0.1 mm]
System Service Mode
[Range/Default/Step]
D046: [0 to 5000/200/1]
D049: [0 to 5000/750/1]
D046: [0 to 5000/300/1]
D049: [0 to 5000/750/1]
8
117