Ricoh BE-C1 D046 Field Service Manual page 643

Erases all debug logs on the SD Card. If the card contains only debugging files generated
by an event specified by SP5858, the files are erased when SP5857 010 or 011 is executed.
To enable this SP, the machine must be cycled off and on.
Free Space on SD Card
13
Displays the amount of space available on the SD card.
Copy SD to SD (Latest 4MB)
14
Copies the last 4MB of the log (written directly to the card from shared memory) onto an SD
card.
Copy SD to SD (Latest 4MB Any Key)
15
This SP copies the log on an SD card (the file that contains the information written directly
from shared memory) to a log specified by key number.
Make HDD Debug
16
This SP creates a 32 MB file to store a log on the HDD.
Make SD Debug
17
This SP creates a 4 MB file to store a log on an SD card.
Debug Save When
These SPs select the content of the debugging information to be saved to the destination
5858
selected by SP5857 002. SP5858 3 stores one SC specified by number. Refer to Section
4 for a list of SC error codes.
Engine SC Error
1
Stores SC codes generated by copier engine errors.
0: OFF 1: ON
Controller SC Error
2
Stores SC codes generated by GW controller errors.
0: OFF 1: ON
Any SC Error
3
[0 to 65535/1]
4 Jam
System Service Mode
8
GW
195