Table of Contents
Advertisement
CHAPTER 5
432-0005-00-10 Rev 100 — Voyager III Operator's Manual
Voyager III System
Configuration
Overview
This chapter describes how to configure the system options using on-screen
menus. To operate the Voyager III camera does not require modifying any of the
factory configuration settings. However, these menus let you:
• Choose configuration options that match your personal preferences or provide
optimal performance under varying conditions, such as a default color
scheme.
• Enable or disable specialized features such as using the camera as a
webcam, using the NMEA messaging interface, or operating the camera in
firefighter mode.
After you make updates, most of the changes persist. A few settings, however,
revert to the factory default when the system is rebooted. These include firefighter
mode, surveillance mode, and point mode. In addition color and polarity settings
revert unless you have used Set Thermal Video Default to define a new default.
Not all options can be used at the same time. For example, you cannot use the
Voyager III tracking module while at the same time receiving data directly from
radar and GPS using the NMEA interface. The way the various options interact is
also described in the following sections.
43
Advertisement
Table of Contents
