Operation; Charging The Battery; Charging The Battery Using The Flir Power Supply; Charging The Battery Using The Flir Stand-Alone Battery Charger - FLIR EX series User Manual

7

Operation

7.1 Charging the battery

7.1.1 Charging the battery using the FLIR power supply

Follow this procedure:
1. Connect the power supply to a wall outlet.
2. Connect the power supply cable to the USB connector on the camera.
NOTE
The charging time for a fully depleted battery is 2 hours.

7.1.2 Charging the battery using the FLIR stand-alone battery charger.

Follow this procedure:
1. Connect the stand-alone battery charger to a wall outlet.
2. Remove the battery from the camera.
3. Put the battery into the stand-alone battery charger.
NOTE
• The charging time for a fully depleted battery is 2 hours.
• The battery is being charged when the blue LED is flashing.
• The battery is fully charged when the blue LED is continuous.

7.1.3 Charging the battery using a USB cable

Follow this procedure:
1. Connect the camera to a computer using a USB cable.
NOTE
• To charge the camera, the computer must be turned on.
• Charging the camera using a USB cable connected to a computer takes considerably longer than
using the FLIR power supply or the FLIR stand-alone battery charger.

7.2 Turning on and turning off the camera

• Push the button to turn on the camera.
• Push and hold the button for less than 5 seconds to put the camera in standby
mode. The camera then automatically turns off after 48 hours.
• Push and hold the button for more than 10 seconds to turn off the camera.
#T559828; r.18043/22369; en-US
12