Magnetic Clutch - Kubota B1830 Workshop Manual

B1830,B2230,B2530,B3030, WSM

(3) Magnetic Clutch

A magnetic clutch is used to engage and disengage
the compressor from the engine. Main components are
stator (6), rotor with pulley (5), and pressure plate (1) to
engage the drive pulley (4) and compressor (8)
magnetically.
The stator is fixed on the compressor housing, and
the pressure plate (1) is attached to the compressor
shaft. Two ball bearings (2) are used between the inner
surface of the rotor and the front housing of the
compressor.
(1) Pressure Plate
(2) Ball Bearing
(3) Snap Ring
(4) Drive Pulley
10-M13
CABIN
(5) Rotor with Pulley
(6) Stator
(7) Snap Ring
(8) Compressor
9Y1210003CAM0016US0
KiSC issued 05, 2012 A