Kubota B1830 Workshop Manual page 472

B1830,B2230,B2530,B3030, WSM
Rotor
1. Press out the rotor (1) from drive end frame (3).
IMPORTANT
• Take special care not to drop the rotor and damage the slip
ring or fan, etc..
(1) Rotor
(2) Block
Retainer Plate
1. Unscrew the four screws holding the retainer plate, and remove
the retainer plate (1).
(1) Retainer Plate
Bearing on Drive End Side
1. Press out the bearing from drive end frame (3) with a press and
jig (1).
(1) Jig
(2) Block
Bearing at Slip Ring Side
1. Lightly secure the rotor (1) with a vise to prevent damage, and
remove the bearing (2) with a puller (3).
(1) Rotor
(2) Bearing
9-S33
ELECTRICAL SYSTEM
(3) Drive End Frame
9Y1210003ELS0054US0
9Y1210003ELS0055US0
(3) Drive End Frame
9Y1210003ELS0056US0
(3) Puller
9Y1210003ELS0057US0
KiSC issued 05, 2012 A