Kubota B1830 Workshop Manual page 266

B1830,B2230,B2530,B3030, WSM
Removing PTO ON-OFF Shift Fork and PTO Shift Arm
1. Remove the cir-clip (1) from the PTO clutch shaft (3).
2. Remove the cir-clip (4) the PTO ON-OFF arm shaft (6).
3. Remove the shifter (2) and the PTO clutch spring (7).
4. Remove the bolt (9) and the washer (8) from the transmission
case.
5. Remove the PTO shift arm (13).
(When reassembling)
• Install the PTO cotter (10) to the groove of the PTO shifter
securely.
• Install the ball (11) and the spring (12) to the transmission case
using the special ball guide (14).
(1) Cir-clip
(2) Shifter
(3) PTO Clutch Shaft
(4) Cir-clip
(5) PTO ON-OFF Shift Fork
(6) PTO ON-OFF Arm Shaft
(7) Clutch Spring
3-S42
TRANSMISSION
(8) Washer
(9) Bolt
(10) PTO Cotter
(11) Ball
(12) Spring
(13) PTO Shift Arm
(14) Ball Guide
9Y1210003TRS0053US0
KiSC issued 05, 2012 A