Differential Gear Section - Kubota B1830 Workshop Manual

B1830,B2230,B2530,B3030, WSM

(12) Differential Gear Section

Separating Hydraulic Cylinder, Transmission Case and Rear
Axles
1. Remove the hydraulic cylinder as an assembly.
2. Separate the transmission case.
3. Separate the rear axles.
(When reassembling)
Hydraulic cylinder
mounting bolt (M10)
Transmission case
Tightening torque mounting bolt and nut
(M10)
Rear axle case mounting
bolt (M10)
(1) Hydraulic Cylinder Assembly
(2) Transmission Case
(3) Differential Case
(4) Rear Axle Case, R.H.
(5) Rear Axle Case, L.H.
Rear-PTO Case and Rear PTO Shaft
1. Remove the rear PTO cover mounting bolts and the rear PTO
cover (1).
(When reassembling)
• Apply liquid gasket (Three Bond 1206D or equivalent) to the
joint surface of the rear axles cases and the rear PTO cover.
Rear PTO cover mounting
Tightening torque
bolt for aluminum (M10)
(1) Rear PTO Cover
3-S66
TRANSMISSION
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
28.9 to 32.5 lbf·ft
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
29.0 to 32.5 lbf·ft
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
29.0 to 32.5 lbf·ft
[A] Manual Transmission Model
9Y1210003TRS0086US0
39.3 to 44.1 N·m
4.0 to 4.5 kgf·m
29.0 to 32.5 lbf·ft
(2) PTO Drive Shaft
9Y1210003TRS0087US0
KiSC issued 05, 2012 A