Independent Pto Clutch - Kubota B1830 Workshop Manual

B1830,B2230,B2530,B3030, WSM

(10) Independent PTO Clutch

PTO Clutch Case
1. Remove the external cir-clip (11) from the spline boss (12).
2. Remove the internal cir-clip (13) from the PTO clutch case (2).
3. Remove the clutch disks (9) and the clutch plates (10) from the
PTO clutch case (2).
4. Remove the ball bearing (1) from the PTO clutch case (2) with
a puller.
NOTE
• When removing the cir-clip, use an adequate size snap ring
pliers.
(1) Ball Bearing
(2) PTO Clutch Case
(3) Brake Plate 4
(4) Brake Plate 2
(5) PTO Clutch Shaft
(6) Thrust Bearing
(7) PTO Shifter
3-S60
TRANSMISSION
(8) 25T Mid PTO Gear
(9) Clutch Disk
(10) Clutch Plate
(11) External Cir-clip
(12) Spline Boss
(13) Internal Cir-clip
9Y1210003TRS0079US0
KiSC issued 05, 2012 A