Kubota B1830 Workshop Manual page 242

B1830,B2230,B2530,B3030, WSM
Removing Receiver, Condenser and Refrigerant Hoses
1. Disconnect the high pressure pipe (3) and the low pressure pipe
(2) from the compressor.
2. After removing the battery, disconnect the connector from the
receiver pressure switch. Remove the bolts (8) and the receiver
(10).
3. Remove the condenser (7).
4. Remove the refrigerant clamps (12), (13).
5. Dismount the receiver, the condenser with the refrigerant hose
(4) not to bend or not to damage the refrigerant pipes connected
to the receiver.
(When reassembling)
• Connect the battery positive cable first.
• Connect the battery negative cable second.
(1) Compressor
(2) Low Pressure Pipe
(3) High Pressure Pipe
(4) Refrigerant Hose
(5) Wiring Harness
(6) Pressure Switch
(7) Condenser
3-S18
TRANSMISSION
(8) Bolt
(9) Refrigerant Pipe
(10) Receiver
(11) Refrigerant Hose
(12) Clamp
(13) Clamp
9Y1210003TRS0015US0
KiSC issued 05, 2012 A