Kubota B1830 Workshop Manual page 535

B1830,B2230,B2530,B3030, WSM
Removing Cover, Step and Stopper
1. Remove the bolts (3).
2. Remove the cover (1).
3. Remove the bolts and the step (2).
4. Remove the bolt and the stopper (5).
5. Remove the cabin mounting bolts and the nuts.
(When reassembling)
Cabin mounting bolts and
Tightening torque
nuts (M14)
(1) Cover
(2) Step
(3) Bolt
Disconnecting Water Hoses
1. Loosen the water drain cock (1).
2. Drain the coolant.
3. Remove the hose clamps (3). Disconnect the water hoses (2)
from the engine.
(When reassembling)
• Fill the coolant to the specified capacity.
Coolant Capacity
(1) Water Drain Cock
(2) Water Hose
10-S30
100 to 120 N·m
10.2 to 12.2 kgf·m
73.8 to 88.5 lbf·ft
(4) Bolt and Nut
(5) Stopper
9Y1210003CAS0054US0
5.2 L
5.5 U.S.qts.
4.6 Imp.qts.
(3) Hose Clamp
9Y1210003CAS0055US0
KiSC issued 05, 2012 A
CABIN