Check Points Of Every 50 Hours - Kubota B1830 Workshop Manual

B1830,B2230,B2530,B3030, WSM

[3] CHECK POINTS OF EVERY 50 HOURS

Checking Engine Start System (HST Model) (without OPC)
CAUTION
• Do not allow anyone near the tractor while testing.
• If the tractor does not pass the test, do not operate the
tractor.
Preparation before testing.
1. Sit on the operator's seat.
2. Set the parking brake and stop the engine.
3. Shift the range gear shift lever to "NEUTRAL" position.
4. Place the speed control pedal (HST pedal) in "NEUTRAL"
position.
5. Shift the PTO clutch lever to "OFF" position.
Test: Switch for the speed control pedal (HST pedal).
1. Depress the speed control pedal (HST pedal).
2. Turn the key to "START" position.
3. The engine must not crank.
Test: Switch for the PTO clutch lever.
1. Place the speed control pedal (HST pedal) in "NEUTRAL"
position.
2. Shift the PTO clutch lever to "ON" position.
3. Turn the key to "START" position.
4. The engine must not crank.
(1) Range Gear Shift Lever (L-M-H)
(2) PTO Clutch Lever
(Independent PTO Lever)
Checking Engine Start System (Manual Transmission Model)
(without OPC)
CAUTION
• Do not allow anyone near the tractor while testing.
• If the tractor does not pass the test, do not operate the
tractor.
Preparation before testing.
1. Sit on the operator's seat.
2. Set the parking brake and stop the engine.
3. Place the shuttle shift lever in "NEUTRAL" position.
4. Shift the PTO ON-OFF lever to "OFF" position.
Test: Switch for the shuttle shift lever.
1. Shift the shuttle shift lever to the forward or reverse position.
2. Fully depress the clutch pedal and turn the key to "START"
position.
3. The engine must not crank.
Test: Switch for the PTO ON-OFF lever.
1. Engage the PTO ON-OFF lever to "ON" position.
2. Shift the shuttle shift lever to the "NEUTRAL" position.
3. Turn the key to "START" position.
4. The engine must not crank.
(1) Shuttle Shift Lever
(2) Clutch Pedal
G-18
GENERAL
(3) Speed Control Pedal (HST Pedal)
9Y1210003GEG0013US0
(3) PTO ON-OFF Lever
(4) Range Gear Shift Lever (L-M-H)
9Y1210003GEG0014US0
KiSC issued 05, 2012 A