Kubota B1830 Workshop Manual page 44

B1830,B2230,B2530,B3030, WSM
Checking Engine Start System (Manual Transmission Model)
(with OPC)
CAUTION
To avoid personal injury:
• Do not allow anyone near the tractor while testing.
• If the tractor does not pass the test do not operate the
tractor.
Preparation before testing.
1. Sit on operator's seat.
2. Set the parking brake and stop the engine.
3. Shift the range gear shirt lever to "NEUTRAL" position.
4. Shift the shuttle shift lever in "NEUTRAL" position.
5. Shift the PTO ON-OFF lever to "OFF" position.
Test: Switch for the shuttle shift lever.
1. Shift the shuttle shift lever to the forward or reverse position.
2. Fully depress the clutch pedal and turn the key to "START"
position.
3. The engine must not crank.
Test: Switch for the PTO ON-OFF lever.
1. Shift the PTO ON-OFF lever to "ON" position.
2. Shift the shuttle shift lever to the "NEUTRAL" position.
3. Fully depress the clutch pedal and turn the key to "START"
position.
4. The engine must not crank.
Test: Switches for the operator's seat and the PTO ON-OFF
lever.
1. Sit on the operator's seat.
2. Start the engine.
3. Engage the PTO ON-OFF lever.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off after approximately 1 second.
(1) Shuttle Shift Lever
(2) Clutch Pedal
G-19
GENERAL
(3) PTO ON-OFF Lever
(4) Range Gear Shift Lever
9Y1210003GEG0015US0
KiSC issued 05, 2012 A