Kubota B1830 Workshop Manual page 338

B1830,B2230,B2530,B3030, WSM
Bevel Gear Case Gears
1. Remove the internal snap ring (5).
2. Take out the bevel gears (3), (2) with ball bearings (7), (6) and
shims (4).
(When reassembling)
• Install the shim (4) to their original position.
(Reference)
• Thickness of adjusting shims:
1.0 mm (0.039 in.)
0.8 mm (0.031 in.)
1.2 mm (0.047 in.)
1.4 mm (0.055 in.)
(1) Bevel Gear Case
(2) Bevel Gear (16T)
(3) Bevel Gear
B1830, B2230, B2530: 10T
B3030: 11T
6-S9
FRONT AXLE
(4) Shim
(5) Internal Cir-clip
(6) Ball Bearing
(7) Ball Bearing
9Y1210003FBS0014US0
KiSC issued 05, 2012 A