Pto Clutch Lever [Lx2620]; Pto Clutch Lever [Lx2620Su] - Kubota LX2620 Operator's Manual

PTO OPERATION
Mid PTO speed
Engine speed
PTO speed
Rear PTO speed
Engine speed
Shaft
PTO speed

2. PTO clutch lever [LX2620]

IMPORTANT :
• To avoid shock loads to the PTO, reduce engine
throttle from high idle to low idle by pushing up
on engine throttle when engaging the PTO, then
open the throttle to the recommended engine
rpm.
• To avoid damage to PTO clutch and implement,
shift the PTO clutch lever slowly, when
engaging the PTO clutch. Do not keep the PTO
clutch lever half way.
• To avoid damage of transmission, when PTO
select lever is not smoothly shifted, slightly
shift PTO clutch lever.
• To avoid damage of transmission, do not shift
PTO select lever until the PTO has stopped
completely.
1. The PTO clutch lever engages or disengages the
PTO clutch which gives the PTO independent
control.
2. Shift the lever to "ON" to engage the PTO clutch.
Shift the lever to "OFF" to disengage the PTO
clutch.
[ROPS model]
(1) PTO clutch lever
LX2620,LX2620SU
2500 rpm
2500 rpm
2398 rpm
6-spline
540 rpm
(A) "ON" "ENGAGE"
(B) "OFF" "DISENGAGE"
[CAB model]
(1) PTO clutch lever
NOTE :
• Tractor engine will not start if the PTO clutch
lever is in the engaged "ON" position.
• When you stand up from the seat with the
PTO clutch lever in the "ON" position, the
engine will stop regardless of the position of
the PTO select lever.
This is because the tractor is equipped with
an operator presence control (OPC) system.

3. PTO clutch lever [LX2620SU]

IMPORTANT :
• To avoid shock loads to the PTO, reduce engine
throttle from high idle to low idle by pushing up
on engine throttle when engaging the PTO, then
reengage the engine to high idle.
• To avoid damage to PTO clutch and implement,
shift the PTO clutch lever slowly, when
engaging the PTO clutch. Do not keep the PTO
clutch lever half way.
1. The tractor has a 540 rpm speed position.
PTO
(A) "ON" "ENGAGE"
(B) "OFF" "DISENGAGE"
65