Kubota B1830 Workshop Manual page 16

B1830,B2230,B2530,B3030, WSM
CARE OF PICTORIAL SAFETY LABELS
1. Keep pictorial safety labels clean and free from obstructing material.
2. Clean pictorial safety labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing pictorial safety labels with new labels.
4. If a component with pictorial safety label(s) affixed is replaced with new part, make sure new label(s) is (are)
attached in the same location(s) as the replace component.
5. Mount new pictorial safety labels by applying on a clean dry surface and pressing any bubbles to outside edge.
I-12
INFORMATION
9Y1210003INI0009US0
9Y1210003INI0010US0
KiSC issued 05, 2012 A