Kubota B1830 Workshop Manual page 423

B1830,B2230,B2530,B3030, WSM
Parking Brake Switch (with OPC)
This switch is located on the axle case L.H. When
the parking brake switch is not in neutral position, the
parking brake switch is pushed in and electric circuit is
opened.
(Adjusting)
• The parking switch is pushed against the arm when
the parking brake is in the released position.
• The parking switch is not in contact with the arm
when the parking brake is in the second notch
position.
NOTE
• In case the seat is vacant (or the operator gets up
from the seat).
a) When the parking brake is in the released on
position, engine must stop immediately after
shifting the rear PTO gear shift lever.
b) When the parking brake is in the third notch
position, engine does not stop and the rear
PTO rotates after shifting the PTO gear shift
lever.
(1) Parking Brake Switch
Seat Switch (with OPC)
This switch is located in the seat. When the seat
switch is not in neutral position, the seat switch is turned
on and electric circuit is opened.
(1) Seat Switch
9-M17
ELECTRICAL SYSTEM
[A] Switch ON
[B] Switch OFF
9Y1210003ELM0036US0
9Y1210272ELM0034US0
KiSC issued 05, 2012 A