Check Points Of Every 400 Hours - Kubota B1830 Workshop Manual

B1830,B2230,B2530,B3030, WSM

[7] CHECK POINTS OF EVERY 400 HOURS

Adjusting Front Axle Pivot (Front Axle Rocking Force)
1. Jack up the front side of tractor.
2. Set a spring balance to the front axle flange.
3. Measure the front axle rocking force.
4. If the measurement is not within the factory specifications,
adjust with the adjusting screw (2). After applying liquid gasket
Three Bond 1206D or equivalent to the thread portion of the
adjusting screw (2) to prevent front axle oil from leaking out of
the front axle holder (3).
5. Tighten the lock nut (1) firmly.
Front axle rocking force Factory specification
(1) Lock Nut
(2) Adjusting Screw
(3) Holder
(4) Thrust Collar
(5) Front Axle Case
G-36
GENERAL
50.0 to 100.0 N
5.1 to 10.2 kgf
12.8 to 22.4 lbf
A: Thread Portion
9Y1210003GEG0039US0
KiSC issued 05, 2012 A