Disassembling And Assembling - Kubota B1830 Workshop Manual

B1830,B2230,B2530,B3030, WSM

[2] DISASSEMBLING AND ASSEMBLING

Separating Brake Pedal
(1) Brake Pedal Shaft
(2) Clutch Pedal
(3) Clevis Pin
(4) Clevis Pin
(5) Brake Pedal L.H.
(Brake Pedal)
1. Remove the right hand side step.
2. Remove the HST pedal. (HST Model).
3. Remove the pins (11) and disconnect the brake rods (9), (12).
4. Remove the return spring (8).
5. Remove the external snap ring (7) at the end of the brake pedal shaft (1).
6. Remove the clevis pin (4) of the brake pedal L.H. (5) and remove the clevis pin (3) of the clutch pedal (2).
7. Pull the right and left brake pedals from the brake pedal shaft (1).
8. Tap out the brake pedal shaft (1) to the left, and remove it with the clutch pedal (2).
(Parking Brake)
1. Remove the lock nuts and remove the parking brake rods (14), (18).
2. Remove the pin (13) and disconnect the brake rods (9), (12).
3. Disconnect the parking brake arm (15) from parking brake lever plate (20).
4. Remove the clevis pin (16) and remove the parking brake arm (15) and arm shaft (17).
5. Remove the parking brake lever (19) and parking brake lever plate (20) as a unit.
(When reassembling)
• Apply grease to the brake pedal shaft.
• Be sure to adjust the brake pedal free travel and parking brake lever travel.
(6) Brake Pedal R.H.
(7) External Snap Ring
(8) Return Spring (Brake Pedal)
(9) Brake Rod R.H.
(10) Return Spring (Clutch Pedal)
(11) Pin
(12) Brake Rod L.H.
(13) Pin
(14) Parking Brake Rod L.H.
(15) Parking Brake Arm
5-S6
BRAKES
(16) Clevis Pin
(17) Parking Brake Arm Shaft
(18) Parking Brake Rod R.H.
(19) Parking Brake Lever
(20) Parking Brake Lever Plate
9Y1210003BRS0006US0
KiSC issued 05, 2012 A