Kubota B1830 Workshop Manual page 254

B1830,B2230,B2530,B3030, WSM
Key Stop Solenoid and Hydraulic Delivery Pipe
1. Remove the key stop solenoid connector.
2. Remove the engine stop solenoid (9) using a small size rachet
handle (1), the extension joint (2), the universal joint (3) and the
thinner socket (10 mm).
3. Remove the hydraulic delivery pipe mounting nuts.
4. Slide the hydraulic delivery pipe.
5. Loosen the hose band (7).
6. Disconnect the suction hose (8) from the hydraulic pump.
(When reassembling)
• Apply the liquid gasket (Three Bond 1206D or equivalent) to the
joint face of the key stop solenoid and the engine.
(1) Rachet Handle
(2) Extension Joint
(3) Universal Joint
(4) Thinner Socket (10 mm, 0.39 in.)
(5) Standard Socket (10 mm)
3-S30
TRANSMISSION
(6) Hydraulic Delivery Pipe
(7) Hose Band
(8) Suction Hose
(9) Engine Stop Solenoid
9Y1210003TRS0035US0
KiSC issued 05, 2012 A