Kubota B1830 Workshop Manual page 243

B1830,B2230,B2530,B3030, WSM
Disconnecting Water Hoses
1. Loosen the water drain cock (1).
2. Drain the coolant.
3. Remove the hose clamps (3). Disconnect the water hoses (2)
from the engine.
(When reassembling)
• Fill the coolant to the specified capacity.
Coolant capacity (with
CABIN model
recovery tank)
(1) Water Drain Cock
(2) Water Hose
Removing Inner Roof
1. Remove the screws (2) from the control panel.
2. Remove the knob (3).
3. Remove the rivets (1) and the screws (4) from the inner roof (5).
(1) Rivet
(2) Screw
(3) Knob
Removing Steering Wheel and Meter Panel
1. Remove the steering wheel cap.
2. Remove the steering wheel mounting nut (3).
3. Remove the steering wheel with a steering wheel puller (Code
No. 07916-51090).
4. Remove the bolts (2) and the front wiper cover (1).
5. Disconnect the coupler.
6. Remove the meter panel (5).
7. Disconnect the hour-meter cable (8) from the meter panel.
8. Remove the panel lower cover (6).
9. Remove the spring (10) and the steering post stay (9).
10. Remove the bolts (7) from the cabin frame.
(When reassembling)
Steering wheel mounting
Tightening torque
nut
(1) Front Wiper Cover
(2) Bolt
(3) Nut
(4) Steering Wheel
(5) Meter Panel
3-S19
TRANSMISSION
5.2 L
6.3 U.S.qts
4.8 Imp.qts
(3) Hose Clamp
9Y1210003TRS0016US0
(4) Screw
(5) Inner Roof
9Y1210003TRS0017US0
20 to 40 N·m
2.1 to 4.0 kgf·m
15 to 29 lbf·ft
(6) Panel Lower Cover
(7) Bolt
(8) Hour-meter Cable
(9) Steering Post Stay
(10) Spring
9Y1210003TRS0018US0
KiSC issued 05, 2012 A