Kubota B1830 Workshop Manual page 42

B1830,B2230,B2530,B3030, WSM
Adjusting Clutch Pedal Free Travel
1. Stop the engine and remove the key.
2. Slightly depress the clutch pedal and measure free travel at the
top of pedal stroke.
3. If adjustment is needed, loosen the lock nut (2) and turn the
clutch rod (1) to adjust the rod length within acceptable limits.
4. Retighten the lock nut (2).
5. After adjusting, release the clutch pedal and check the
clearance (B). If adjustment is needed, adjust the clearance (B)
with the stopper bolt (3).
NOTE
• After adjustment, secure the stopper bolt (3) with the lock
nut.
Clutch pedal free travel
Factory specification
(A)
(1) Clutch Pedal Rod
(2) Lock Nut
(3) Stopper Bolt
G-17
GENERAL
10 to 17 mm
0.40 to 0.66 in.
(A) Clutch pedal free travel
(B) Clearance (About 8.5 mm,
0.34 in.)
9Y1210003GEG0012US0
KiSC issued 05, 2012 A