Kubota B1830 Workshop Manual page 324

B1830,B2230,B2530,B3030, WSM
Brake Cam Plate and Brake Cam Lever
1. Remove the brake cam plate (1) and the balls (2).
(When reassembling)
• Apply grease to the balls (2).
• If O-ring (4) is defective, change it.
• Install the brake cam lever (3) to the brake cam plate (1)
securely.
• Move the brake cam lever (3) by hand to check the movement.
If the movement is heavy, refine the brake cam plate (1) with
emery paper.
(1) Brake Cam Plate
(2) Ball
(3) Brake Cam Lever
(4) O-ring
(5) Brake Shaft
5-S9
BRAKES
A: Portion to the Brake Cam Lever
9Y1210003BRS0012US0
KiSC issued 05, 2012 A