Check Points Of Every 50 Hours - Kubota B2301 Workshop Manual

B2301, B2601, WSM

[2] CHECK POINTS OF EVERY 50 HOURS

Checking Engine Start System
WARNING
To avoid personal injury or death:
• Do not allow anyone near the tractor while testing.
• If the tractor does not pass the test do not operate the
tractor.
• Detach an implement before testing.
 Preparation before testing.
1. Sit on operator's seat.
2. Set the parking brake and stop the engine.
3. Shift the range gear shift lever to "NEUTRAL" position.
4. Place the speed control pedal in "NEUTRAL" position.
5. Shift the PTO clutch lever to "OFF" position.
 Test: Switch for the speed control pedal.
1. Depress the speed control pedal.
2. Turn the key to "START" position.
3. The engine must not crank.
 Test: Switch for the PTO clutch lever.
1. Place the speed control pedal in "NEUTRAL" position.
2. Shift the PTO clutch lever to "ON" position.
3. Turn the key to "START" position.
4. The engine must not crank.
 Test: Switches for the operator's seat and the PTO clutch
lever.
1. Sit on the operator's seat.
2. Start the engine.
3. Shift the PTO clutch lever to "ON" position.
4. Release the parking brake.
5. Stand up. (Do not get off the machine.)
6. The engine must shut off after approximately 1 second.
(1) Range Gear Shift Lever
(2) PTO Clutch Lever
G-19
GENERAL
(3) Speed Control Pedal
(4) Operator's Seat
9Y1211156GEG0019US0
KiSC issued 11, 2014 A