Pto; Pto Operation; Pto Clutch Control Switch - Kubota STW34 Operator's Manual

PTO

PTO OPERATION

To avoid personal injury or death:
A Disengage PTO, stop engine, and allow all
rotating components to come to a complete
stop before connecting,
adjusting, or cleaning
equipment.
BPTO Clutch Control Switch
The PTO clutch control switch engages or disengages the
PTO clutch which gives the PTO independent control.
Turn the switch to "ON" to engage the PTO clutch. Turn
the switch to "OFF" to disengage the PTO clutch.

(1) PTO clutch control switch

C PTO Clutch Control Switch
To turn ON
While pushing the switch, turn clockwise to the "
position and release your hand. (In the ON position,
switch slightly rises itself.)
disconnecting,
any PTO driven
"ON" "OFF"
"
To Turn OFF
Tap on top of the switch, and the switch will return to the
OFF position.
A To avoid shock loads to the PTO, reduce engine
speed when engaging the PTO, then open the throttle
to the recommended speed.
A There are PTO 540 and 540E rpm indicated marks on
the tachometer board.
A Tractor engine will not start if the rear PTO system or
mid PTO system is engaged.
A When you stand up from the seat with the speed
control pedal placed in "NEUTRAL" position and the
mid-PTO gear shift lever placed in "ON" position, the
engine will stop automatically.
A When you stand up from the seat with the speed
control pedal placed in "NEUTRAL" position, the rear
PTO gear shift lever engaged and the parking brake
released, the engine will stop automatically.
PTO 37
(A) "PUSH"