Software Concept - Leica 3D Disto User Manual

3D Disto, Description of the System
3.5
3D Disto system
software
Application
programs
Demo mode

Software Concept

The 3D Disto software comprises the central functions of the instrument:
• Several languages are integrated into this software. The preferred operating
language can be chosen at the first setup or in the Setting menu.
• The instrument has a restart function in case the Control Unit is not responding.
To restart the instrument press
• To reset the software to the factory settings go to Menu, press Settings and
Reset to default.
Several application programs are available for the instrument, supported by assistant
pop-ups that guide through the workflow. These applications can be tested in a
Demo mode or by activation through license keys.
There is an option to test the available application programs by activating the Demo
mode first. This provides full software performance for 40 working hours. A pop-up
reminds when Demo mode runs out.
To enable the application programs in Demo mode, carry out the following steps:
1. Press Menu » Applications » Demo.
2. All application programs are listed in the Menu and marked with a sandglass
symbol until Demo mode runs out.
for ten seconds.
38