System Concept; Software Concept - Leica TS11 User Manual

2.2
2.2.1
Description
Software for TS
models
Software upload
TS11, Description of the System

System Concept

Software Concept

All instruments use the same software concept.
Software type
TS firmware
(TS_xx.fw)
Language software
(SYS_LANG.sxx)
Applications
(xx.axx)
Customised applica-
tions
(xx.axx)

Uploading software can take some time. Ensure that the battery is at least 75%
full before beginning the upload, and do not remove the battery during the
upload process.
Software for
All TS models
Description
This important software covers all functions of the instru-
ment.
The applications Survey and Setup are integrated into the
firmware and cannot be deleted.
The English language is integrated into the firmware and
cannot be deleted.
Numerous languages are available for the TS instruments.
This software is also referred to as system language.
The English language is the default language. One language is
chosen as the active language.
Many optional survey-specific applications are available for
the TS instruments.
Some of the applications are activated freely and require no
licence key, and others require purchasing and are only acti-
vated with a licence key.
Applications requiring an activation run for a 180 days trial
period without prior activation.
Customised software, specific to user requirements, can be
developed using the GeoC++ development kit in addition to
run Windows CE-based applications if GeoCOM robotics
licence is available. Information on the GeoC++ development
environment is available on request from a Leica Geosystems
representative.
Description
The SmartWorx Viva is stored in the flash RAM of the TS
instrument.
Software update instructions
• Download the most recent TS firmware file from
https://myworld.leica-geosystems.com. Refer to "Intro-
duction".
• Connect the TS instrument to your PC. Refer to "4.7
Connecting to a Personal Computer".
• Copy the TS firmware file onto a folder system on the
Leica SD card.
• Start the TS instrument. In SmartWorx Viva select
User\Tools & other utilities\Load firmware & Apps. Select
Object to transfer: Firmware.
• A message will appear when the upload is complete.
20