Verifying The Fpd Image Upgrade Progress; Fpd Image Upgrade Examples; Automatic Fpd Image Upgrade Example - Cisco ASR 1000 Configuration Manual

Chapter 26 Upgrading Field-Programmable Devices

Verifying the FPD Image Upgrade Progress

You can use the show upgrade fpd progress command to view a "snapshot" of the upgrade progress
while an FPD image upgrade is taking place. The following example shows the type of information this
command displays:

Router# show upgrade fpd progress
FPD Image Upgrade Progress Table:
==== =================== ====================================================
Slot Card Type
==== =================== ================== ========== ========== ===========
0/1 SPA-8XCHT1/E1
---- ------------------- ------------------ ----------- --------- -----------
0/2 SPA-2XT3/E3
==== =================== ====================================================

FPD Image Upgrade Examples

This section provides examples of automatic and manual FPD image upgrades. It includes the following
examples:
•
•
operation.

Automatic FPD Image Upgrade Example

The following example shows the output displayed when a SPA in slot 0 subslot 1 requires an FPD image
upgrade and the upgrade fpd auto command is enabled. The required FPD image is automatically
upgraded.
*Nov 28 13:14:22.782: %FPD_MGMT-3-INCOMP_IMG_VER: Incompatible I/O FPGA (FPD ID=2) image
version detected for SPA-2XT3/E3 card in subslot 0/1. Detected version = 0.6, minimum
required version = 1.0. Current HW version = 1.0.
*Nov 28 13:14:22.783: %FPD_MGMT-5-UPGRADE_ATTEMPT: Attempting to automatically upgrade the
FPD image(s) for SPA-2XT3/E3 card in subslot 0/1. Use 'show upgrade fpd progress' command
to view the upgrade progress ...
*Nov 28 13:14:22.841: %FPD_MGMT-6-BUNDLE_DOWNLOAD: Downloading FPD image bundle for
SPA-2XT3/E3 card in subslot 0/1 ...
*Nov 28 13:14:22.981: %FPD_MGMT-6-UPGRADE_TIME: Estimated total FPD image upgrade time for
SPA-2XT3/E3 card in subslot 0/1 = 00:01:00.
*Nov 28 13:14:22.983: %FPD_MGMT-6-UPGRADE_START: I/O FPGA (FPD ID=2) image upgrade in
progress for SPA-2XT3/E3 card in subslot 0/1. Updating to version 1.1. PLEASE DO NOT
INTERRUPT DURING THE UPGRADE PROCESS (estimated upgrade completion time = 00:01:00) ...
*Nov 28 13:14:43.267: %FPD_MGMT-6-UPGRADE_PASSED: I/O FPGA (FPD ID=2) image in the
SPA-2XT3/E3 card in subslot 0/1 has been successfully updated from version 0.6 to version
1.0. Upgrading time = 00:00:20.285
*Nov 28 13:14:43.267: %FPD_MGMT-6-OVERALL_UPGRADE: All the attempts to upgrade the
required FPD images have been completed for SPA-2XT3/E3 card in subslot 0/1. Number of
successful/failure upgrade(s): 1/0.
OL-14127-08
Field Programmable
Device : "ID-Name"
2-I/O FPGA
4-T3 FPGA
Automatic FPD Image Upgrade Example, page 26-7
Manual FPD Image Upgrade Example, page 26-8
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
FPD Image Upgrade Examples
Approx.
Time Elapsed
Needed Time State
00:01:00 00:00:23 Updating...
--:--:-- --:--:-- Waiting...
26-7