Facility Data Link Configuration Example; Invert Data On T1/E1 Interface Example - Cisco ASR 1000 Configuration Manual

Configuration Examples
!
Router(config-if)# crc 32

Facility Data Link Configuration Example

The following example configures FDL on a T1 interface:
! Specify the interface to configure and enter interface configuration mode.
!
Router(config)# interface serial 1/0/0.2
!
! Specify the T1 number and select fdl.
!
Router(config-controller)#t1 2 fdl ansi

Invert Data on T1/E1 Interface Example

The following example inverts the data on the serial interface:
! Specify the interface to configure and enter interface configuration mode.
!
Router(config)# interface serial 3/0/0.1/2/1:0
!
! Configure invert data.
!
Router(config-if)# invert data
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
19-28
Chapter 19 Configuring the 1-Port Channelized OC-3/STM-1 SPA and 1-Port Channelized OC-12/STM-4 SPA
OL-14127-08