Verifying The Traffic Parameter Configuration - Cisco ASR 1000 Configuration Manual

Aggregation services routers sip and spa software
Hide thumbs Also See for ASR 1000:
Table of Contents

Advertisement

Chapter 7
Configuring the ATM SPAs
Command or Action
Router(config-if-atm-vc)# vbr-nrt output-pcr output-scr
output-mbs
or
Router(config-if-atm-vc)# vbr-rt pcr scr burst
Note
Repeat Step 2 through Step 3 for each PVC to be configured.
Step 4
Router(config-if-atm-vc)# end

Verifying the Traffic Parameter Configuration

Use the show atm vc command to verify the configuration of the traffic parameters for a PVC:
Router# show atm vc
Codes: DN - DOWN, IN - INACTIVE
Interface
0/2/2.1
To verify the configuration of all PVCs on an interface, use the show atm vc interface atm command:
Router# show atm vc interface atm 0/2/2.1
VCD /
Interface
0/2/2.1
OL-14127-08
VCD /
Name
VPI
VCI Type
1
2
32 PVC
Name
VPI
VCI Type
1
2
32 PVC
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
Purpose
Configures the variable bit rate–nonreal time
(VBR-nrt) QoS, the peak cell rate (PCR), sustainable
cell rate (SCR), and maximum burst cell size (MBS) for
the PVC:
output-pcr—Output PCR in kbps. The valid range
is 48 to 149760 (OC-3) or 599040 (OC-12).
output-scr—Output SCR in kbps. The valid range
is 48 to PCR, and typically is less than the PCR
value.
output-mbs—Output MBS in number of cells. The
valid range is 1 to 65535, depending on the PCR
and SCR values. If the PCR and SCR are
configured to the same value, the only valid value
for MBS is 1.
Configures the variable bit rate–real time (VBR-rt)
QoS, and the PCR, average cell rate (ACR), and burst
cell size (BCS) for the PVC:
pcr—PCR in kbps. The valid range is 48 to 149760
(OC-3) or 599040 (OC-12).
scr—SCR in kbps. The valid range is 48 to PCR,
and typically is less than the PCR value.
burst—Burst size in number of cells. The valid
range is 1 to 65535, depending on the PCR and
SCR values. If the PCR and SCR are configured to
the same value, the only valid value for burst is 1.
Exits PVC configuration mode and returns to privileged
EXEC mode.
Peak Av/Min Burst
Encaps
SC
Kbps
SNAP
UBR
149760
Peak Av/Min Burst
Encaps
SC
Kbps
SNAP
UBR
149760
Configuration Tasks
Kbps Cells St
UP
Kbps Cells St
UP
7-19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents