Configuration Tasks - Cisco ASR 1000 Configuration Manual

Configuring the 2-Port and 4-Port Channelized T3
SPAs
This chapter provides information about configuring the 2-Port and 4-Port Channelized T3 SPAs on the
Cisco ASR 1000 Series Routers. It includes the following sections:
•
•
•
For information about managing your system images and configuration files, refer to the Cisco IOS
Configuration Fundamentals Configuration Guide and Cisco IOS Configuration Fundamentals
Command Reference publications that corresponds to your Cisco IOS software release.
For more information about the commands used in this chapter, refer to the Cisco IOS Software Releases
Command Reference for your Cisco IOS release. For more information, see the
Documentation" section on page

Configuration Tasks

This section describes how to configure the 2-Port and 4-Port Channelized T3 SPA for the Cisco ASR
1000 Series Routers and includes information about verifying the configuration.
It includes the following topics:
•
•
•
•
OL-14127-08
Configuration Tasks, page 16-1
Verifying the Interface Configuration, page 16-16
Configuration Examples, page 16-17
Required Configuration Tasks, page 16-2
Specifying the Interface Address on a SPA, page 16-7
Optional Configurations, page 16-8
Saving the Configuration, page 16-16
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
C H A P T E R
-xxvi.
16
"Related
16-1