Release History; Chapter 6 Overview Of The Atm Spa - Cisco ASR 1000 Configuration Manual

Release History

Release History
Release
Cisco IOS XE
Release 2.5
Cisco IOS XE
Release 2.3
Supported Features
This section provides a list of some of the primary features supported by the ATM hardware and
software:
•
•
•
•
•
Basic Features
•
•
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
6-2
Modification
The following SPA support was introduced on the Cisco ASR 1000 Series
Routers in Cisco IOS XE Release 2.5:
•
The following new feature support was introduced for the ATM SPAs in
Cisco IOS XE Release 2.5:
•
•
•
•
•
•
•
In addition to the
also the new features list for Cisco IOS XE Release 2.5 for more details
about these features at:
http://www.cisco.com/en/US/products/ps9587/products_feature_guides_li
st.html
Initial release for the 1-Port Clear Channel OC-3 ATM SPA and 3-Port
Clear Channel OC-3 ATM SPA for Cisco ASR 1000 Series Routers.
Basic Features, page 6-2
SONET/SDH Error, Alarm, and Performance Monitoring, page 6-3
Layer 2 Features, page 6-4
Layer 3 Features, page 6-4
High Availability Features, page 6-6
Bellcore GR-253-CORE SONET/SDH compliance (ITU-T G.707, G.783, G.957, G.958)
Interface-compatible with other Cisco ATM adapters
1-Port Clear Channel OC-12 ATM SPA
Access Node Control Protocol (ANCP)
ATM Multipoint Subinterfaces
ATM PVC Ranges
CISCO-PPPOE-MIB
Local Template-Based ATM PVC Provisioning
Point-to-Point Protocol Over Ethernet Over ATM (PPPoEoA)
PPPoE Connection Throttling
"Configuring the ATM SPAs"
Chapter 6 Overview of the ATM SPAs
chapter in this guide, see
OL-14127-08