Chapter 6
Overview of the ATM SPAs
•
Supported MIBs
The following MIBs are supported in Cisco IOS XE Release 2.3 and later releases for the ATM SPAs on
the Cisco ASR 1000 Series Routers.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For more information about MIB support on a Cisco ASR 1000 Series Routers, refer to the Cisco ASR
1000 Series Aggregation Services Routers MIB Specifications Guide, at the following URL:
http://www.cisco.com/en/US/docs/routers/asr1000/mib/guide/asr1kmib.html
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use
Cisco MIB Locator found at the following URL:
http://tools.cisco.com/ITDIT/MIBS/servlet/index
OL-14127-08
For ATM SPAs on the Cisco ASR1000 series routers, ISSU from releases prior to Cisco IOS XE
Release 2.5.0 to Cisco IOS XE Release 2.5.0, or from Cisco IOS XE Release 2.5.0 to a release prior
to Cisco IOS XE Release 2.5.0, is not supported. If you want to perform ISSU in this environment,
you must first remove the configuration from the ATM SPAs on the router, and then shut down the
SPAs using the shutdown command prior to running the ISSU process.
ATM-MIB
CISCO-AAL5-MIB
CISCO-ATM-EXT-MIB
CISCO-CLASS-BASED-QOS-MIB
CISCO-ENTITY-ALARM-MIB
CISCO-ENTITY-EXT-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-ENTITY-ASSET-MIB
CISCO-ENTITY-SENSOR-MIB
CISCO-IETF-PW-MIB
CISCO-IETF-PW-MPLS-MIB
CISCO-IF-EXTENSION-MIB
CISCO-MQC-MIB
CISCO-PPPOE-MIB (beginning in Cisco IOS XE Release 2.5)
CISCO-SONET-MIB
ENTITY-MIB
ENTITY-SENSOR-MIB
IF-MIB
MIB-II
MPLS-CEM-MIB
OLD-CISCO-CHASSIS-MIB
SONET-MIB
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
Supported MIBs
6-7