Verifying Deactivation And Activation Of A Sip - Cisco ASR 1000 Configuration Manual

Aggregation services routers sip and spa software
Hide thumbs Also See for ASR 1000:
Table of Contents

Advertisement

Preparing for Online Insertion and Removal of the SIP and SPAs
To activate a SIP and its installed SPAs after the SIP has been deactivated, use the following command
in global configuration mode:
Command
Router(config)# hw-module slot slot-number
start
For more information about chassis slot numbering, see the
and SPAs" section on page

Verifying Deactivation and Activation of a SIP

To verify the deactivation of a SIP, enter the show platform command in privileged EXEC configuration
mode. Observe the State field associated with the SIP that you want to verify.
The following example shows that the Cisco ASR1000-SIP10 located in slot 1 is deactivated.
Router# show platform
Chassis type: ASR1006
Slot
--------- ------------------- --------------------- -----------------
0
0/0
0/1
0/2
0/3
1
R0
F0
P0
P1
Slot
--------- ------------------- ---------------------------------------
0
1
R0
F0
To verify activation and proper operation of a SIP, enter the show platform command and observe "ok"
in the State field as shown in the following example:
Router# show platform
Chassis type: ASR1006
Slot
--------- ------------------- --------------------- -----------------
0
0/0
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
4
4-1.
Type
State
ASR1000-SIP10
ok
SPA-1XOC12-POS
ok
SPA-1XOC12-POS
ok
SPA-5X1GE-V2
ok
SPA-4XOC3-POS-V2
ok
ASR1000-SIP10
disabled
ASR1000-RP1
ok, active
ASR1000-ESP10
ok, active
Unknown
ps, fail
Unknown
ps, fail
CPLD Version
Firmware Version
06120701
12.2(20071009:051408) [gschnorr-mcp_...
07091401
12.2(20070807:170946) [gschnorr-mcp_...
07010515
12.2(33r)XN2
07021400
12.2(20071030:180953) [gschnorr-mcp_...
Type
State
ASR1000-SIP10
ok
SPA-5X1GE-V2
ok
Purpose
Activates the SIP in the specified slot and its installed
SPAs, where:
slot-number—Specifies the chassis slot number
where the SIP is installed.
start—Activates the SIP and removes it from reset
mode.
"Identifying Slots and Subslots for the SIP
Insert time (ago)
2d20h
2d20h
1d21h
2d20h
2d20h
1d23h
1w3d
1w3d
never
never
Insert time (ago)
03:19:46
03:18:28
Troubleshooting the SIP
OL-14127-08

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents