Cisco ASR 1000 Configuration Manual page 422

Information About Ingress Classification
Command or Action
Step 7
interface {POS | Serial} interface-path-id
Example:
Router(config)# interface POS 0/2/0
Step 8
plim qos input class-map index-id
Example:
Router(config-if)# plim qos input class-map 1
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
27-14
Chapter 27 Classifying and Scheduling Packets for ASR 1000 Series
Purpose
Enters the interface configuation mode and specifies the
POS or Serial interface name with the notation
slot/sub-slot/interface-id. Possible interface types for this
procedure are:
POS
•
Serial
•
The example indicates a 0 port in the POS SPA
Note
adapter at sub-slot 2 in the SIP at slot 0.
Attaches the ingress classification class-map template with
the specified index-id to the POS or Serial interface.
OL-14127-08