Manual Fpd Image Upgrade Example - Cisco ASR 1000 Configuration Manual

FPD Image Upgrade Examples
*Nov 28 13:14:43.268: %FPD_MGMT-5-CARD_POWER_CYCLE: SPA-2XT3/E3 card in subslot 0/1 is
being power cycled for the FPD image upgrade to take effect.

Manual FPD Image Upgrade Example

In the following example, FPD for the 2-port T3/E3 SPA in subslot 0/3 is upgraded manually from the
bundled FPD image package file. The command excludes the reload option so the SPA does not
automatically reload.
Router#upgrade hw-module subslot 0/3 fpd bundled
% The following FPD will be upgraded for SPA-2XT3/E3 (H/W ver = 1.1) in subslot 0/3:
% NOTES:
- Use 'show upgrade fpd progress' command to view the progress of the FPD upgrade.
- You must reload the card after the upgrade. The FPD upgrade is not 
- The output of 'show hw-module <target> fpd' will not reflect the upgraded FPD 
% Are you sure that you want to perform this operation? [no]: yes
% Initiating the upgrade operation on the target card ...
(Use "show upgrade fpd progress" command to see upgrade progress)
Router#
*Mar
SPA-2XT3/E3 card in subslot 0/3 = 00:01:00.
*Mar
progress for SPA-2XT3/E3 card in subslot 0/3. Updating to version 1.1. PLEASE DO NOT
INTERRUPT DURING THE UPGRADE PROCESS (estimated upgrade completion time = 00:01:00) ...
*Mar
SPA-2XT3/E3 card in subslot 0/3 has been successfully updated from version 1.0 to version
1.1. Upgrading time = 00:00:25.676
*Mar
required FPD images have been completed for SPA-2XT3/E3 card in subslot 0/3. Number of
successful/failure upgrade(s): 1/0.
In the following example, FPD for the 2-port T3/E3 SPA in subslot 0/3 is upgraded manually from the
bundled FPD image package file. The command includes the reload option so the SPA automatically
reloads so the new FPD image takes effect immediately.
Router#upgrade hw-module subslot 0/3 fpd bundled reload
% The following FPD will be upgraded for SPA-2XT3/E3 (H/W ver = 1.1) in subslot 0/3:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
26-8
================== =========== =========== ============
Field Programmable
Device: "ID-Name"
================== =========== =========== ============
2-I/O FPGA
================== =========== =========== ============
finalized until the card is reloaded.
version until the card is reloaded to finalize the upgrade.
4 16:13:17.230: %FPD_MGMT-6-UPGRADE_TIME: Estimated total FPD image upgrade time for
4 16:13:17.232: %FPD_MGMT-6-UPGRADE_START: I/O FPGA (FPD ID=2) image upgrade in
4 16:13:42.909: %FPD_MGMT-6-UPGRADE_PASSED: I/O FPGA (FPD ID=2) image in the
4 16:13:42.909: %FPD_MGMT-6-OVERALL_UPGRADE: All the attempts to upgrade the
================== =========== =========== ============
Field Programmable
Device: "ID-Name"
================== =========== =========== ============
2-I/O FPGA
================== =========== =========== ============
Chapter 26
Current Upgrade Estimated
Version Version Upgrade Time
1.0 1.1
Current Upgrade Estimated
Version Version Upgrade Time
1.0 1.1
Upgrading Field-Programmable Devices
00:01:00
00:01:00
OL-14127-08