Cisco ASR 1000 Configuration Manual page 172

Using show Commands to Check SFP Module and XFP Module Status
Problem
Incorrect QL values
Alarms
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide
10-32
Chapter 10
Solution
• Ensure that there is no framing mismatch
with the SSM option.
• Reproduce the issue using the debug
network-clock errors, debug
network-clock event, and debug platform
ssm commands. Also, enable the debug
hw-module subslot command.
Reproduce the issue using the debug
•
platform network-clock command enabled
in the route processor. Alternatively, enable
the debug network-clock event and debug
network-clock errors commands.
Configuring the Ethernet SPAs
OL-14127-08