GE Advent Installation Instructions Manual page 30

Access Code Length
50013
(Default = 4) Select the required length of all installer, primary,
and user access codes. If the access code length is changed, then
all access codes will automatically be updated to the correct
length. Access codes that contained less digits than the new
length will be given leading zeros (1234 = 001234). Access codes
that contained more digits than the new length will be have the
first digit(s) removed (987654 = 7654).
Changing the Access Code Length:
1. Enter the item number. The current code length will be
displayed.
2. Enter the new code length (4–6) and press
Phone Settings
Enable DTMF Dialing Line 1
Enable DTMF Dialing Line 2
1: 17094, 2: 17095
(Default = on) Select whether or not you want to enable the phone
line for DTMF (touch-tone) dialing. If off, the panel will dial
using pulse format.
To set the Dialing format:
Once the item number has been entered, enter
setting on (DTMF dialing) or
ƒ to apply the new setting.
Press
Phone Line 1 Dialing Prefix
Phone Line 2 Dialing Prefix
1: 17105, 2: 17106
(Default = none) Enter up to a six-digit phone line dialing prefix.
Use this setting to access an outside line, disable call waiting, etc.
Line Dial Prefix Format:
‰ Enter 00–09 for numbers 0-9
‰ Enter 10 for * (star)
‰ Enter 11 for # (pound)
‰ Enter 12 for D (1–5 second delay)
‰ Enter 13 for W (wait for dial tone)
Setting a Line Dialing Prefix:
1. Once the desired item number has been entered the cur-
rent line dial prefix will be displayed.
2. Enter up to a six-digit phone line dialing prefix using the
format above and press
Deleting a Line Dialing Prefix:
1. Once the desired item number has been entered the cur-
rent line dial prefix will be displayed.
0 + ƒ . The touchpad will display NO DATA.
2. Enter
28
(Codes)
ƒ .
(Phone)
1 to turn this
0 to turn it off (pulse dialing).
(Phone)
ƒ .
Number of Attempts Before Reporting Failure RF
Buddy
17101
(Default = 5) Set the number of dialing attempts (to central
station) before a buddy transmission is generated.
Note
Not investigated by UL.
To set the number of Attempts:
Once the item number has been entered, enter the number of
buddy dial attempts (0-11)* and press
* 0 = immediate transmit request, 11 = no transmit request.
No Phone Line Attached
17069
(Default = off) Turn this setting on if there is no phone line
connected to the panel. When on, the panel will not check for
phone line failure.
Turning No Phone Line Attached On/Off:
Once the item number has been entered, enter
0
setting on (no phone line) or
to apply the new setting.
(Phone)
ƒ
.
(Phone)
1
to turn this
to turn it off (phone line). Press
Advent Commercial Fire System
ƒ