Table of Contents
Advertisement
Number to Dial
yy002
(Default = none) Enter up to a 24-digit phone number for
reporting or downloading.
Phone Number Format:
‰ Enter 00–09 for numbers 0-9
‰ Enter 10 for * (star)
‰ Enter 11 for # (pound)
‰ Enter 12 for D (1–5 second delay)
‰ Enter 13 for W (wait for dial tone)
To enter Number to Dial:
1.
Enter the desired item number (ex. 19002).
2.
Enter the phone number using the list above. For exam-
ple, if you wanted the phone number to be
"1235551212," at the keypad you would enter "01, 02,
03, 05, 05, 05, 01, 02, 01, 02."
ƒ and the touchpad displays the new phone num-
3.
Press
ber.
Note
In order for the phone number to be used for reporting
events or downloading, it must be enabled. See the
Phone Number Enable setting (yy001) on page 29.
To delete a Number to Dial:
Enter the desired item number. Enter
display NO DATA.
Number of Attempts
yy003
(Default = 5) Set the number of times (attempts) the panel will
dial (and report) to the reporting or downloader phone number.
Note
19003 for phones 1 and 2, 21003 for phones 3 and 4.
To set the Number of Dial Attempts:
Once the item number has been entered, enter the number of dial
ƒ
attempts (5–10) and press
.
Comm Format
yy004
(Default = Contact ID) Select the type of communication format
the panel will use when reporting events to the central station.
Note
Currently only Contact ID format is supported.
30
(Phone)
0
ƒ
+
. The touchpad will
(Phone)
(Phone)
Report Panic Special
yy005
(Default = off) Choose how the panel formats touchpad panic
alarm reports to the central station. When on, touchpad panic
alarms report using the following special 3-digit codes:
‰ Fire Panic—599
‰ Police Panic—598
‰ Auxiliary Panic—597
‰ Medical Panic—596
When off, panics will report as "500" plus the bus device number.
For example, a keypad with bus device number "03" would report
as "503."
Turning Report Panic Special On/Off:
Once the item number has been entered, enter
setting on (report panic special), or
ƒ
Press
to apply the new setting.
System Pagers
Enabled Pager Phone Number
zz001
(Default = off) Select whether or not to enable the pager phone
number. If on, number will report events to the pager. If off, the
number will be skipped when the panel is reporting to pagers.
To turn Enable Pager Phone Number On/Off:
Once the item number has been entered (25001–40001), enter
to turn this setting on (page), or
ƒ
to apply the new setting.
Pager Number to Dial
zz002
(Default = none) Enter up to a 24-digit phone number for pager
reporting.
Pager Phone Number Format
‰ Enter 00–09 for numbers 0-9
‰ Enter 10 for * (star)
‰ Enter 11 for # (pound)
‰ Enter 12 for D (1–5 second delay)
‰ Enter 13 for W (wait for dial tone)
To enter a Pager Phone Number:
1.
Enter the desired item number (ex. 25002).
2.
Enter the phone number using the list above. For exam-
ple, if you wanted the pager phone number to be
"1235551212," at the keypad you would enter "01, 02,
03, 05, 05, 05, 01, 02, 01, 02."
ƒ and the touchpad displays the new pager phone
3.
Press
number.
Note
In order for the panel to report events to the pager the
pager phone number must be enabled. See Enable Pager
Phone Number setting (zz001).
To delete a Pager Phone Number:
Enter the desired item number. Enter
display NO DATA.
(Phone)
1
to turn this
0
to turn it off (not special).
(Phone-Pagers)
0
to turn it off (no page). Press
(Phone-Pagers)
0
ƒ
+
. The touchpad will
Advent Commercial Fire System
1
Hide quick links:
Advertisement
Table of Contents
