Defining External Linearization Weights; Setting Fully Automatic Adjustment Function Isocal; Setting Up Timer-Controlled Actions - Sartorius cubis MPS Quick Reference Manual

System Settings (Menu)
Calibration/adjustment data
Define external linearization weights
Calibration/adjustment data
Set fully autom. adjustment function isoCAL
Please select the menu item:
Menu
Level balance
Calibration/adjustment data
Configure timer controlled actions
Display device information
Device parameters
Back Language
Please select action:
Actions
Action 1
02/23/2016 12:00:00; Y:0 M:0 D:1 S:0 M:0
Back Edit
®
18 Cubis MPS Quick Reference Guide
4.2.3

Defining External Linearization Weights

t
In the menu, touch
of the settings options.
t
In the selection of the settings options, touch
linearization weights
Ext. lin. weights
linearization:
Weight value (in grams), ID, certificate, validation
4.2.4

Setting Fully Automatic Adjustment Function isoCAL

t
In the menu, touch
of the settings options.
t
In the selection of the settings options, touch
adjustment function isoCAL
: Define the function setting: Off/only alert levels, manual start/*On,
isoCAL
automatic execution
isoCAL alert levels
repeating/Alarm message, adjustment urgently required
isoCAL temperature
isoCAL interval time
4.3

Setting Up Timer-Controlled Actions

You can program the following actions so that they run automatically at preset
times:
− Display message and execute a command (see example below)
− Execute a command
− Show a message (e.g. a prompt as a reminder)
t
In the operating mode, touch
y
The selection of the system settings is displayed.
t
Touch
Configure timer controlled actions
y
The available actions are displayed. When you open this menu for the first time,
the list will be empty.
t
Touch
Edit
activated
Calibration/adjustment data
:
: Enter the values of the weights needed for external
Calibration/adjustment data
:
: *isoCAL status field only ("Tab")/Alert message,
: Enter temperature difference (in Kelvin).
: Enter interval time in hours.
.
Menu
.
to access the selection
Define external
to access the selection
Set fully autom.
.