Importing/Exporting Data; Executing Task: Climate Control - Sartorius cubis MPS Quick Reference Manual

"Climate Control" Application
Import/export data
Climate control
Administrator
| Import/export data
03/01/2016 14:45:33
Export all data to SD card
Import all data from SD card
Back
Please select task:
Task
Climate control
Climate control
Weighing
Basic weighing
Edit
Weighing
Sort
Climate control Administrator
| Climate control
03/01/2016 14:45:33
[Start] Climate control
Limits for internal climate module
Limits for external climate module
Limits for water temperature
Basic settings
End
®
50 Cubis MPS Quick Reference Guide
7.3.5

Importing/Exporting Data

You can export and import data from the "Climate Control" application.
t
In the menu for the "Climate Control" application, select
.
data
y
Here you can export the settings for the
memory card, or import it from an SD memory card.
t
Please ensure that the correct SD memory card has been inserted into the pipette
calibration system (see page 29). If the SD memory card is faulty or not properly
inserted, an error message is displayed.
t
In order to export the data, touch
t
In order to import the data, touch
You can save your data by exporting it or easily copy your settings to other pipette
calibration systems. This eliminates the need to update your data multiple times.
t
In order to switch from the general settings to the menu for the "Climate Control"
End
application, touch
7.4

Executing Task: Climate Control

D
t
If you haven't already done so, go to Task Management.
y
The task selection is displayed.
t
Select the Climate Control
or:
Start
t
If the desired task is already selected, touch
Start
y
The menu for the Climate Control application is displayed after a few seconds.
In this menu, you must now configure the limits for the internal climate module,
the limits for the external climate module, the limits for the water temperature,
and the basic settings using the relevant menu items (see page 47). You will
need the appropriate user access rights for these tasks. If these menu items are
inactive (grayed out), you do not have user access rights for these tasks and must
either change the user (see page 63) or have the required user access rights set
up for you (see page 64).
t
To start the Climate Control application, touch
.
Start
Start
"Climate
Export all data to SD card
Import all data from SD card
.
End
task.
Start
Import/export
Control" application to an SD
.
.
.
[Start] Climate control or