Sartorius cubis MPS Quick Reference Manual page 52

"Climate Control" Application
-30° – 30°
0° – 45°
®
52 Cubis MPS Quick Reference Guide
t
Move the tip of the pipette into the range of the sensor.
t
Empty the pipette into the pipetting vessel. Observe all regulations for correct
pipetting, e.g., ISO 8655.
t
Remove the pipette from the range of the sensor.
O
t
Close the upper draft shield panel using the
y
As soon as the measured results display has reached stability, you can read off
the result.
J
t
Tare the pipette calibration system again before repeating the process.
O
keys.