Defining General Settings For The "Climate Control" Application - Sartorius cubis MPS Quick Reference Manual

Basic settings
Administrator
Climate control
| Basic settings
03/01/2016 14:45:33
Ext. climate module:
On, monitor ext.mod.
Sensor water temp.:
On, monitor w.temp.
Draftshield autom.:
On, use motion sens.
Draftshield sensor:
Medium
Draftsh. lighting:
Bright
Back
7.3.4

Defining General Settings for the "Climate Control" Application

t
In the menu for the "Climate Control" application, select
y
The overview of all settings for the "Climate Control" application is displayed.
t
Select the settings for the application:
−
Ext. climate module
external climate module (climate tower) on or off.
Off, no monitoring
air pressure, air humidity) for the ambient environment are not monitored.
The
Limits for external climate module
On, monitor ext.mod.
temperature, air pressure, air humidity) for the ambient environment are
monitored if the external climate module (climate tower) is connected to the
Save
device.
− Sensor water temp.
water temperature sensor (container for the calibration medium) on or off.
Off, no monitoring
for the calibration medium is not monitored. The
temperature
On, monitor w.temp.
the calibration medium is monitored if the container for the calibration
medium is connected to the device.
−
Draftshield autom.
panel is activated or deactivated.
Off, use draftsh. keys
opened and closed manually using the keys on the right and left of the
display and control unit. The
out.
On, use motion sens.
via the motion sensor.
−
Draftshield sensor
for the upper draft shield panel. You can choose between
and High
− Draftsh. lighting
defined. You can choose between
−
Unit of temperature
You can choose between
t
Touch .
Save
t
In order to switch from the general settings to the menu for the "Climate
Control" application, touch
: You can switch the monitoring function for the
: The climatic conditions (min./max. air temperature,
: The climatic conditions (min./max. air
: You can switch the monitoring function for the
: The water temperature within the container
menu item is grayed out.
: The water temperature within the container for
: The automatic function of the upper draft shield
: The upper draft shield panel must always be
Draftshield sensor
: The upper draft shield panel opens automatically
: You can define the sensitivity of the motion sensor
.
: The lighting within the weighing chamber can be
Bright
: You can define the unit of temperature.
and
Celsius
Back .
Cubis
"Climate Control" Application
Basic settings
menu item is grayed out.
Limits for water
menu item is grayed
,
Low Medium
, Medium , and Dark .
.
Fahrenheit
®
MPS Quick Reference Guide
.
,
49